Discontinued

WIR SYS 7518

Mid-range Infrared System

Product Highlights

  • Designed to maximize coverage area up to 4,000 sq. ft.
  • Looks great! Sleek, professional styling complements room aesthetics.
  • Green power–if no audio is present after a few minutes, unit automatically disables power to IR diodes, reducing power consumption by 80 percent.

Description

This system features the NEW WIR TX75 infrared transmitter, ensuring participants in a conference room, courtroom, classroom or other mid-sized venue receive direct, clear communication of your message without sacrificing security. Includes comfortable, stethoset-style, WIR RX18 infrared receivers–ideal for single-or two-channel applications. The sleek and stylish TX75 is designed to maximize coverage area up to 4,000 square feet (transmitter with WIR TX75-S slave) in single-channel mode. One additional slave (sold separately) can be added for additional coverage of up to 2,000 square feet (for total coverage of up to 6,000 square feet). Placing additional slaves in the same room increases coverage and enhances freedom of movement. A single CAT-5 cable carries both power and signal to slaves–truly a one-cable connection. Mounting brackets and power supply are included.

 
Available options:
 
WIR TX925-01 - Euro power cord
WIR TX925-02 - UK power cord
WIR TX925-04 - Australia power cord

System Includes

(1) WIR TX75 infrared transmitter

(1) WIR TX75-S slave emitter

(5) WIR RX18 stethoset-style, infrared receivers

(1) CHG 518 five-bay, drop-in charger

(1) BKT 024 wall / ceiling mount kt

(1) MLB 003 slave linking bar

(1) TFP 046 international power supply with WLC 004 U.S. mains AC plug

(1) IDP 008 ADA wall plaque

Features

  • Additional TX75-S slave emitter is available for use with the WIR SYS TX7518 (sold separately).
  • Front cover can be painted to match décor
  • Headset and body-pack receivers also available for use with WIR SYS TX7518 (sold separately).
  • Robust digital communication bus between master and slave unit reduces interference.
  • Master unit has troubleshooting lights built in to simplify installation.
  • Separate RCA audio inputs for each channel (2.3/2.8 MHz) accept balanced or unbalanced line level inputs; use together for stereo operation or separately for mono.
  • Unit senses if only one channel is in use and doubles the output power on that channel for twice the coverage.

Specifications

WIR RX18 Architectural and Engineering Specifications

  • The receiver shall be an under-chin stetho style with an IR detector lens in the face of the unit.
  • The receiver shall have a rotary type volume control and the power switch shall be built into the arms of the unit so it will automatically shut off when not in use.
  • The receiver shall operate for seven hours per charge with the BAT AP11A NiMH battery pack.
  • The receiver shall be housed in a black and grey plastic case.
  • The receiver shall have a three position selector switch for 2.3 MHz, stereo or 2.8 MHz modulated IR signals.
  • The receiver shall provide 120dB SSPL90 output.
  • The system electrical frequency response shall be 200Hz to 8kHz and the S/N ratio shall be 60dB at 10m.
  • The receiver shall have CE, RoHS and WEEE approval and be covered by a five-year parts and labor warranty (90 days on battery pack).
  • The receiver shall be the Williams Sound model WIR RX18.

WIR RX18

Weight:

2.0 oz (56 g) with battery

Material and Color:

ABS plastic, Black and Grey

Battery Type, Life:

BAT AP11A NiMH Battery Pack, 7 hours

Operating Range:

Up to 3,063 sq ft (285 sq m) when used with the TX9 emitter or TX90 transmitter in single-channel mode

Up to 1,000 sq ft (93 sq m) when used with the TX75 in single-channel mode

Modulation Frequency:

2.3 MHz or 2.8 MHz or stereo

Frequency Response:

200 Hz to 8 kHz, ± 5 dB

Signal to Noise Ratio:

60 dB at 10 m

Controls:

Volume control thumbwheel

3-position selection switch (2.3 MHz, 2.8 MHz, stereo)

Acoustic Output:

120 dB MAX SSPL90 with 2 cc coupler

Compatibility:

Compatible with 2.3 MHz and 2.8 MHz IR transmitters, WIR TX900 and WIR TX925 systems

Battery Charger:

CHG 518

Power Switch:

Built into receiver “arms"

Ear pads:

Uses EAR 240 silicon eartips

Approvals:

CE, RoHS

Warranty:

5 years (90 days on battery)

WIR TX75 Architectural and Engineering Specifications

  • The Infrared Transmitter shall consist of an all in one modulator and emitter operating on 2.3MHz and/or 2.8MHz. The carrier frequency shall use 50kHz deviation and 50µS pre-emphasis.
  • The Transmitter shall have a minimum coverage of 5,000 sq ft with the WIR RX22-4 receiver in single-channel mode.
  • The Transmitter shall be housed in a heavy-duty black plastic enclosure with a durable infra-red transparent front lens. It shall be convection cooled without fans. The Transmitter includes an omni-directional mounting bracket for various permanent installations.
  • The Transmitter shall have a line level RCA input for each of the channels. Each channel shall have an audio input level LED. There shall be a single 3.5mm microphone input with gain control. The mic input shall have a channel selector switch.
  • The Transmitter shall have a switch to turn off all indicator LED’s. There shall be a switch for selecting either balanced or unbalanced line level inputs.
  • The Transmitter shall have two RJ45 outputs supplying power and baseband signal to two WIR TX75-S slave emitters via CAT-5e cable. Each RJ45 output shall have a green and yellow LED signaling that the slave emitters are receiving power and baseband signal. A single CAT-5e cable supplies power, signal and digital control to the slave unit up to 100 ft from the Transmitter.
  • The Transmitter shall be powered by a 48VDC universal power supply, 50-60Hz, 100-240 VAC input, 19.2W.
  • The Transmitter shall be covered by a two-year parts and labor warranty, 90 days on accessories.
  • This Transmitter shall be the Williams Sound model WIR TX75.

WIR TX75

Dimensions, Weight:

10.0" W (25.4 cm) x 3.1" D (7.9 cm) x 1.5" H (3.8 cm) w/o faceplate or 2.5" H (6.4 cm) w/faceplate, 0.6 lbs (0.3kg)

Color:

Black with silver colored silk screen and silver colored faceplate

Optional: white colored faceplate

Power Supply:

Desktop style international power supply with IEC line cord, 100-240 VAC input, 50-60Hz, 24W; 48VDC output

DC Power Input:

2.5mm ID barrel connector, 48 VDC, 0.4A center positive

Power Indicator:

Green LED

Sleep/Power Save Mode:

Shuts off carrier when no audio is present for 3 minutes

Modulation:

FM Wideband, ±50kHz deviation max, 50 μS pre-emphasis

Carrier Frequencies:

 2.3 MHz (Ch1) and 2.8 MHz (Ch2)

Default at power on = carriers off. Carriers are automatically enabled upon presence of audio.

Emitter IR Power:

0.7 W

Master Only Coverage Area
(minimum, 1-Ch mode):

5,000 sq. ft in single-channel mode with the RX22-4 receiver (464 sq. m)

3,000 sq. ft in single-channel mode with the RX15-2 receiver (279 sq. m)

2,000 sq. ft in single-channel mode with the RX18 receiver (186 sq. m)

Audio Inputs / Controls:

Line inputs: RCA jack for Ch1 and Ch2 accept line level, balanced or unbalanced audio

Line in balanced/unbalanced switch: selects balanced or unbalanced line level audio for RCA jacks

Microphone input:

3.5 mm, stereo jack with signal and bias connected to tip, electret microphone compatible (4 VDC bias supply with 2.7k ohm series resistor)

Microphone gain adjust:

Rotary potentiometer

Microphone channel switch:

Selects microphone input to Ch1 or Ch2

Audio indicators:

Yellow LED blinks at nominal audio level. One per channel

Indicators On/Off:

2-position switch turns on/off indicator lights

“to slave" Output/Input:

(2) 8p8c RJ45 connectors output 48VDC 0.4A power, baseband RF and a bi-directional RS-485 bus for control and status communications

Slave Status Indicators
(on “to slave" jacks):

Green: Power/Unit Status

Yellow: Transmit/Cable Status

Signal-to-Noise Ratio:

70 dB, (line input)

Frequency Response:

95Hz to 17.6kHz, -3dB re 1kHz (line inputs)

125Hz to 17.0KHz, -3dB re 1kHz (microphone input)

Total Harmonic Distortion:

<1% (1 kHz, nominal deviation, line or microphone input)

Operating Requirements:

0-50° C (32°-122°F)

Mounting Kit:

Wall or Ceiling mount: BKT 024 Omnidirectional mount

Optional: slave linking bar (MLB 003)

Warranty:

2 Years

Approvals:

CE, C-tick, FCC, Industry Canada, WEEE, RoHS, CB Scheme

Compatible Receivers:

WIR RX22-4, WIR RX18, WIR RX15-2

WIR TX75 S Architectural and Engineering Specifications

  • The infrared slave emitter will work with the WIR TX 75 C (or D) infrared transmitter(s).
  • The slave emitter shall have a minimum coverage of 6,000 sq. ft. with the WIR RX22-4 receiver in single-channel mode.
  • The slave emitter shall be housed in a heavy-duty black plastic enclosure with a durable infra-red transparent front lens. It shall be convection cooled without fans. It shall have the ability for mounting on an omni-directional mounting bracket or a linking bar to mount above or below the WIR TX 75 C (or D) transmitter. It shall have a removable front bezel.
  • The slave emitter shall have a single CAT-5 input which shall deliver both power and baseband signal from the WIR TX 75 C (or D) transmitter. It shall have a green LED indicator showing when power is received from the WIR TX 75 C (or D) transmitter and a yellow LED showing audio is being received from the WIR TX 75 C (or D).
  • There shall be a switch on the back to turn off the indicator LED’s if desired.
  • The slave emitter shall be covered by a five-year warranty, 90 days on accessories.
  • This infrared slave emitter shall be the Williams Sound model WIR TX 75 S.

WIR TX75 S

Dimensions, Weight:

10.0" W (25.4 cm) x 3.1" D (7.9 cm) x 1.5" H (3.8 cm) w/o faceplate or 2.5" H (6.4 cm) w/faceplate, 0.6 lbs (0.3kg)

Color:

Black with silver colored silk screen and silver colored faceplate

Optional: white colored faceplate

Sleep/Power Save Mode:

Shuts off carrier when no audio is present for 3 minutes

Modulation:

FM Wideband, ±50kHz deviation max, 50 μS pre-emphasis

Carrier Frequencies:

2.3MHz (Ch1) and 2.8MHz (Ch2). Default at power on = carriers off. Carriers are automatically enabled upon presence of audio.

Emitter IR Power:

0.7 W

Slave Coverage Area
(minimum, 1-ch mode):

Note: Slave emitter cannot be used without a master transmitter, but if the slave emitter is aimed so that its coverage area does not overlap that of the master, on its own it will provide:

12,000 sq. ft. (464 sq. m.) in single-channel mode with the RX22-4 receiver

6,000 sq. ft. (557 sq. m.) in single-channel mode with the RX15-2 receiver

4,000 sq. ft. (186 sq. m.) in single-channel mode with the RX18 receiver

Master + Slave Coverage Area (minimum, 1-ch mode)

If slave transmitters are aimed to maximize coverage area (so that their coverage areas minimally overlap that of the master):

24,000 sq. ft. (2,230 sq. m) in single channel mode with the RX22-4, a master and (1) slave transmitter

36,000 sq. ft. (3,345 sq. m) in single channel mode with the RX22-4, a master and (2) slave transmitters

Indicators On/Off:

2-position switch turns on/off indicator lights

Signal-to-Noise Ratio:

70 dB, (line input)

Frequency Response:

95Hz to 17.6kHz, -3dB re 1kHz (line input)

125Hz to 17.0kHz, -3dB re 1kHz (microphone input)

Total Harmonic Distortion:

<1% (1 kHz, nominal deviation, line or microphone input)

From Master Input

8p8c RJ45 connector input provides 48VDC 0.4A power, baseband RF, and a bi-directional RS-485 bus for control and status communications.

Slave Extension Cable:

CAT-5e (or better) cable, maximum 100’ length, with RJ-45 8P8C male connector on each end, TIA568B

Slave Status Indicators
(on “to slave" jacks):

Green: Power/Unit Status

Yellow: Transmit/Cable Status

Operating Requirements:

0-50° C (32°-122°F)

Mounting Kit:

Wall or Ceiling mount: BKT 024 Omnidirectional mount

Optional: slave linking bar (MLB 003)

Warranty:

5 Years

Approvals:

CE, C-tick, FCC, Industry Canada, WEEE, RoHS, CB Scheme

Compatible Receivers:

WIR RX22-4, WIR RX18, WIR RX15-2

Accessories for WIR SYS 7518

BAT AP07D NiMH Rechargeable Battery

MLB 003 Linking Bar for WIR TX75

downloads

Download/View Name Type Language
Infrared Brochure - Low Res Brochures English
WIR SYS 7518 Sell Sheet Sell Sheets English
WIR SYS 7518 Specifications Specifications English

Videos

We have no other products in this category.